General Motors created a buzz when they released a small block inline 6 3.0-liter Duramax diesel for a variety of trucks and SUVs like the 2020 Chevy Silverado 1500 and newly updated 2021 Chevy Tahoe. However, there is a big detail prospective buyers need to know about this engine.
Officially, this engine is also found in the 2020 GMC Sierra 1500, 2021 GMC Yukon and 2021 Chevy Suburban. Although, it is absent in both the off-road versions of GM’s full-size SUVs (more on that in another story).
The engine is a ground up design made to fit perfectly in those vehicles and produces 277 horsepower and 460 pound-feet of torque in the half-ton Silverado with a surprising peak torque at just 1,500 RPMs.
It also includes a variety of innovative engine technologies like ceramic glow plugs that heat up faster providing a quicker cold start, a lightweight aluminum block, low pressure EGR and a variable geometry turbocharger.
That’s a lot of fancy words to say the inherently balanced inline-6 is the leading edge of new diesel engine technology. However, there is that one thing.
What is that one thing? As soon as the news of the engine hit the internet, people quickly pointed to an oil pump belt residing in oil and needing to be inspected at 150,000 miles. While the belt sitting in oil is a bit concerning to many, the fact it is a belt, not a chain or gear driven, also drew some concern. Yet, the MOST concerning part of the belt is the fact you have to drop the transmission to service the belt. Yes, that’s not a typo. You have to drop the transmission to be able to access the belt to INSPECT it at 150,000 miles. This has drawn a lot of criticism.
We received so much feedback on this concern, we reached out to GM to interview their engineer on this engine. This engineer has been with this engine since its creation and spoke to us at length about why the belt was chosen and why, yes, it is true, the transmission has to be removed to access the belt.
Check out our video interview below:
The bottom line
While yes, removing the transmission to inspect a belt is rather ridiculous, and you are looking at around $1,000 for a mechanic to do the inspection, we are talking about a one-time inspection at 150,000 miles. We agree, we don’t like it anymore than you do, but the driving experience from the diesel outweighs the hassle in our opinion. Plus, the fuel economy in the Silverado 1500 approaching an unheard of 30 MPGs is crazy good, which matters a ton with these surging fuel prices.
While this may not be as affordable as say, paying Military Car Shipping to move a privately owned vehicle from one end of the nation to another, at least it’s better than paying full price for premium pump gas.
GM tells us they are looking closer at this belt and will be seeing what they can do to redesign or change out the belt for something else. If they do, we will let you know. For now, just remain aware of what you are getting into, and know that you are in good hands with GM’s redesign plans.
Related posts:
57 comments
jeff
spend your money replacing the belts. do them early and more often than expected, and do not run your fuel low. also try to keep the filters as clean as you can and run cleaners in your fuel to flush it out often enough every 10-15000 mi. Running best coolants and cold air can help even though disels run better with heat. The materials like aluminum dont like heat only the fuel does. This can be a milestone for us all. The guy who spoke about the iron liners really has me thinking. Time to go to the drawing board.
Alicia Blane
Be warned, most of these so called hackers are imposters, Iíve been ripped off 4 times already, thankfully my friend gave me a reliable contact, he works with discretion and delivers, he does all sorts of hacks, I would prefer to let his services speak for itself, you can contact him email…. wizcyber on Wickr or (might have to download wicker app) , if he asks where you got his contact you can say from Lisa.
Robbie Grewal
If GM put in a panoramic roof I would look at there Sierra or Silversado otherwise going with Ford
Arnold Klein
If this is a known issue (and it is), people want to know why there hasn’t been a recall. Well, that’s because even though the long crank or no-crank has been documented by many owners and dealership mechanics, the cause is not always the same. When you have a long list of possible culprits you can’t just say, “oh, this is the problem,” and then fix it for everyon
Daniel Burch
Can you say planned obsolescence?
Hans Eide
I hate to quote Murphy’s law, but when you make something inaccessible it usually
fails.
The timing chain could be the problem being inaccessible, Audi tried this.
But don’t worry with the 20wt oil the engine won’t last 100k so it won’t be a problem.
Tundra’s don’t need the timing belt changed, the water pump fails between 180k to 220k
the belt lasts 300k but it isn’t submerged in oil. Has anyone run a belt submerged in
oil before?
Just a stupid Mechanic
Hans
Keith
Assuming the tranny lasts 150K miles, I would just pull it, replace the diesel motor belt, and install new / rebuilt tranny. None of my 3, Chevy 1500 trannies have lasted 150k miles, so the belt will likely be replaced about 125k miles, when the original tranny is being replaced. I don’t see the problem unless you think the new 10 speed tranny should last 200k miles.
Mark
It will if you actually service it. If you believe the ‘150k service interval’ for the trans fluid it won’t. Speaking from lots of personal experience, albeit with older transmissions (would have to be to put over 200k on them)
Jake
I’ve waited for 12 years for GM to resume diesel Suburban production. My 96 K2500 Suburban with the 6.5 was a great vehicle. The V-8 grunt was well worth the smoke and noise.
I now drive a 6.6 Liter Duramax Suburban (conversion). The horsepower and torque are so much better than anything available in a current pickup or SUV. Yes, it’s tuned and running strong. I just can’t see myself trading the big Duramax for the six-banger. It seems like a huge step backwards. Despite all that, I may test drive one to confirm my suspicions.
SteveG4
This new GM “light-duty” diesel does look interesting. There’s unique new technology integrated into this diesel, therefore I will wait two or three years to see if GM fixes its issues, or even keeps it within their engine lineup.
One nit-pick so far… this new “Dexos-D” 0W-20 oil! Really? A 20 weight oil in a diesel? Does GM want the engine to last, or only through the warranty period? I’m thinking Shell Rotella T6 0W-40 or 5W-40 will be its prescription before long.
Arnold Klein
I assume both these oils are synthetic. Is the belt made of a material other than rubber,
Mike Sorge
All about fuel economy. That’s the big push on this engine. Longevity is earned over the test of time. I’m betting this won’t be any better then the run of the mill gas engine and nowhere near the longevity of a proper diesel.
Byron
“You have to drop the transmission to be able to access the belt to INSPECT it at 150,000 miles. This has drawn a lot of criticism.”. Respectable journalism is a thing of the past. You can’t just quote the engineer directly and say “replacement schedule is 150k miles”?…. How pathetic is that? Definitely not subscribing.
Steve
Well, as European but fan of American trucks, I am amazed Americans finally discover “saving fuel” issue and discover that a 3 liter TD might work as well like in the millions of mid-size trucks worldwide. Well, technology helps and the power smaller diesel engines produce are beyond what Mr. Diesel would ever dream of. I am also surprised GM chose inline-6, that’s a bit older fashioned, but inline-6’s are known since over 40 or more years for great torque and smoother running (BMW got stuck with them for very long for that reason, Jeep had the venerable 4.2 and 4.0s). Problem is the length of the engine, and think GM tried to have a trick around this with the oil belt, quite special. They might try a know-off 4-cylinder for the smaller cars. Just to say, I own a 6.5TD Suburban, old fashioned, and well, V8 is my hobby, but daily driver it is no more. So my headache will be, choose love or mind for the next generation vehicle haha.
jeff
americans were in love with inline 6 for many years . that would be back in the 30’s to the 60’s. they did all they could with them and spent time on the v-8 which was so worth the thought. But yes the straight 6 is a great motor and always has been. The only car company that hated 6 cylinders was Ford. henry ford did not understand the 6 cylinder and loved the 4 and 8 cylinder. he didnt think the 6 cyl would produce anything he was looking for and didnt like the firing order either. As a result Ford has never built a great six cylinder compared to the other car makers. The gas mileage a ford 6 gets is near what a v-8 gets minus 2 mpgs. Its just a curse now, for them hahahahaha.
Howard
The packaging issues the engineer talks about sounds week this is a truck and a couple of more inches out front shouldn’t make a big difference. After all the current model was made with this engine in mind so they say.
Brian in Az
A couple inches longer out front equals hundreds more per unit in costs. They try to reuse the frame, doors, beds, etc from previous models. Lengthening the truck’s nose/hood would require redesign and proportioning of the entire truck with significant costs.
David Kaercher
Gentlemen, I own a 2020 GMC AT4 with the new 3.0 Diesel. I love the truck, but the engine — at least for me — is a dog. As I write this, it is sitting in a shop in Slidell, LA following a trip to see my family. Here I sit, with no transportation from a truck with less than 10,000 miles on it. This is the 4th visit to the dealer in the past 6 months for “Decreased Engine Power” error message and “service engine” light illuminated. So far, 14-days off the road from summer to now. The decreased engine issue really inhibits driving and it is meant to protect the engine from something two different GMC dealers 1,000 miles apart cannot figure out. So, here I sit at Christmas with no truck to play Santa with. Now I’m getting angry and I’m turning up the Social Media heat on GMC to fix this or take the darn truck back. BTW, this is the 7th GM product I have owned and my wife drives a Suburban. Thanks for letting me vent. Merry Christmas!
Time Warner
Don’t run it out of fuel and the DEP error will not appear.
Tim Warner
Now I’m all afraid because of the video of the guys try k vibrating and engine seizing
Rob S
I’m looking to purchase a 2022. The Silverado 1500 with 3.0L Duramax is on my option list. Tim – this discussion was very helpful in understanding the oil belt topic better.
But I will say – another huge issue is the interior design. If the reviews are – the Silverado 1500 interior design is better (how can it not be) but still far behind the competition – I’m done waiting. I suspect we will see tow limits go above 10k for the 3.0L too.
Tim Esterdahl
Yeah, the interior leaves a lot to be desired.
Enrique Garcia
even $1200 to $1600 to drop the transmission and check the oil pump belt and replace is more like $2500 or $3000 dllrs
Richard Williamson
Any info on aftermarket upgrades for the diesel? Exhaust or turbo…
Same goes for the turbo 4 cyl.
Tim Esterdahl
I haven’t heard of anything.
Jared Harris
Seems my posts don’t make it either.
Tim Esterdahl
Your posts are here. Thanks for commenting!
Jared Harris
I own the GMC duramax 3.0l and absolutely love it first diesel I’ve owned. So far no foul almost 3k miles and she is stronger then the day I brought her home.
Terry
Do you have any issues using oil?
Ryan
so anyone want to comment on the Iron liners in an aluminum block?
jeff
iron is best. many years ago circa 1940’s and early 50’s Chrysler used cheaper inferior liners and the pistons reshape from wear and create blow by. there are other materials to use but the cost of them would scare you at the dealership. i wonder if a strengthened magnesium would work, but its just a guess. You raise a great point.when i mention magnesium, im just spit balling. You have me thinking with this issue.
Ryan
why do you keep pulling my comments?
Tim Esterdahl
Hey Ryan,
Not pulling your comments. They just got caught in a filter we have been using. I’ll adjust the settings. Thanks.
bob
you can pull his comments his a d…a..
Howard
The packaging issues the engineer talks about sounds week this is a truck and a couple of more inches out front shouldn’t make a big difference. After all the current model was made with this engine in mind so they say.
Ryan
No one has touched on the fact that this diesel engine has an aluminum engine block with Iron Liners! Iron Liners in an Aluminum Block probably not a good idea!?? any thoughts on this? I.e. difference in thermal coefficiants between different metals? Just Scary!
Marvin L McConoughey
The choice of aluminum for the engine block is not, by itself, fully informative. Much depends on the detailed engineering applied, the quality of the metallurgy, and how much material was used to gain strength. One hopes that GM has done well because owners deserve reliability in their costly vehicles.
Brian in Az
Just a repeat from their first experience with aluminum gas engine blocks….
Run, do not walk from this engine to your nearest Ford or Dodge Ram dealer……
Steve in Seattle
No, Nearly every aluminum V8 in existence used iron sleeves for decades.
– Iron block, cast iron pistons, cast iron heads, car iron intake
– Iron block, cast aluminum pistons, cast iron heads, cast iron intake
– iron block, sintered powder aluminum pistons, cast aluminum heads, cast aluminum intake
– aluminum block w/iron sleeves, forged aluminum pistons, cast aluminum heads, composite intake.
Cast iron sleeves, especially Siamesed ones that install as one single bank, are very reliable.
Marvin L McConoughey
Concur. The technical issues involved should be well understood by any modern car or truck company.
Brian in Az
Those were gasoline powered units. Diesel is a different animal all together.
Unfortunately, the US automakers are slow to learn and late to the game.
I have Sprinters with the 3.0L diesel for work vehicles and they are years ahead. Audi had inline 5 cylinder diesels decades ago; 1978. GM could have used that 25 years ago and been ahead of the game.
bob
are you an ideate ? NHRA motors have been doing that for years
Brian in Az
If you are going to insult someone, you should at least check your spelling. Otherwise, we will all know they YOU ARE THE IDIOT! :O
NHRA motors are aluminum, yes, BUT they are rebuilt after EVERY 60 seconds of run time. Not a good example of durability.
Aluminum blocks flex too much to be used for Diesel engines in my opinion.
jeff
good point, its the cooling of that aluminum which is imprtant. so running cold air intake and optimizing the coolant you use will help. So far the duramax is the diesel to buy. fords seem to have bearing issues at 85000.00 mi which is very scary and can ruin other areas of the motor that cost a lot.so keeping an eye on the belt and pulling the tranny is a better scenario but far from perfect.